Install Kaspersky internet security or any version of kaspersky, unchecked the Firewall option.

This will installed kaspersky without the firewall, after successful installation reboot your system and then install Zone alarm.

Add all kaspersky exe’s to trusted application to zone labs otherwise kaspersky fail to update.

Bookmarkify Frustration

More »

Prevention is better than cure

Giloy (Amta)’s one foot long branch and seven leaf of Tulsi (Basil) and mix it and collect juice of this mixture in a pot. Now boil this juice and drink it. This herbal juice increases our body resistant up to three times.”

Giloy

Tulsi (Holy Basil)

Home remedies for prevention purpose only

Add following ingredients in your diet :-

• Kali mirch (black pepper)
• Adrak (ginger)
• Haldi (Turmeric)
• Tulsi (Basil)
• Nimbu (Lemon)
• Vitamin C foods
• Green leafy vegetables
• Lavang/Laung/Clove

Kali mirch (Black Pepper)

Clove (Laung)

Tulsi (Holy Basil)

Haldi (Turmeric)

Theory of fever / body temperature

When your body temperature rises because of an infection, it’s called a fever. Fevers are caused by chemicals called pyrogens flowing in the bloodstream. Pyrogens make their way to the hypothalamus in the brain, which is in charge of regulating body temperature. When pyrogens bind to certain receptors in the hypothalamus, body temperature rises.One common pyrogen is called Interleukin-1 (IL-1). IL-1 is produced by white blood cells called macrophages when they come into contact with certain bacteria and viruses. IL-1 has multiple purposes, one of which is to signal other white blood cells, called helper T cells, into action. One purpose of a fever is thought to be to raise the body’s temperature enough to kill off certain bacteria and viruses sensitive to temperature changes.

Refer :- Howstuffworks.com

Kali mirch (Black pepper), Adrak (Ginger), Tulsi (Basil), Laung (clove) will increase your immunity as well as body heat in order to kill these viruses.

Homeopathy Medicines

Homeopathic treatment will be helpful in a number of ways:

Influenzinum 200 + Bacillinium 200 + Diphtherinum 200 + Oscillococcinum 200. Can give a good support to the body’s immune system against Swine Flu

Flu Nosode (2008-2009)
Formulated specifically for this year’s flu strain.
Ingredients: Influenzinum V2 - Grippe, Influenzinum V76 - Grippe, Adenovirus (respiratory), Respiratory Synoytial Virus, Chlamydia pneumoniae, Pneumococcinum, Hong Kong flu virus 12X, 30X, 60X, 100 X, Influenzinum Virus 2008/09 30X, 60X - 20% alcohol and purified water.

Flu Nosode (2007-2008)
Influenzum V2-Grippe, Influenzum V76 - Grippe, Adenovirus (respiratory), Respiratory Syncytial Virus, Chlamydia pneumoniae, Pneumococcinum, 12X, 30X, 60X, 100X, Influenzum Virus 2007/08 - 30X, 60X.

FLU NOSODE (2006-2007)
A/Wisconsin/67/2005 (H3N2)-like or the antigenically equivalent A/Hiroshima/52/2005 A/New Caledonia/20/1999 (H1N1)-like strain B/Malaysia/2506/2004-like strain or the antigenically equivalent B/Ohio/1/2005 virus

FLU NOSODE (2005-2006)
Homeopathic Liquid (2005-2006) - 12X, 30X, 60X, 100X combined potency. Adult dose: 10 drops under tongue or in a little water twice a day. Safe for children, scale back according to weight. All homeopathic products need to be taken by themselves and not with food or drink (except water). 2 oz.

FLU NOSODE (2004-2005)
Homeopathic Liquid (2004-2005) - 12X,30X,60X,100X combined potency. Adult dose: 10 drops under tongue or in a little water twice a day. Safe for children, scale back according to weight. All homeopathic products need to be taken by themselves and not with food or drink (except water). 2 oz.

MENINGITIS NOSODE
Meningococcinum - Homeopathic Liquid - 30X, 60X. Recommended if you have a very stiff neck symptom associated with the flu. Adult dose: 10 drops under tongue or in a little water twice a day. Safe for children, scale back according to weight. All homeopathic products need to be taken by themselves and not with food or drink (except water). 2 oz. bottle.

PNEUMONIA HOMEOPATHIC DROPS
This is a nosode blend covering bacterial, viral and fungal pneumonia. Professional formula exclusive for HHA - Homeopathic 30X and 60X - Influenzinum, Adenovirus type 16, Rhinopneumotitis, Respiratory Syncytial virus, Mycoplasma, Pneumoniae, Coxsackie virus, Pneumococcinum Staphylococcus, Hemolytic Streptococcus, Mycobacterium tuberculosis, Rickettsia burnetii, Rickettsia, Hemophilus influenza, Klebsiella, Chlamydia trachomatis, Chlamydia psittaci, Chlamydia pneumoniae, Coccidioides immitis, Histoplasma, Capsulatum in a alcohol UPS 20% and purified water.

Before taking above medicine please consult any homeopath doctor

Reference: http://abchomeopathy.com/forum2.php/179541/

Bookmarkify Frustration

More »

• Click: Tab >Log On

• Select: This Account

• Paste: NT AUTHORITY\LocalService (into fist box just left of Browse option)

• Next: Leave password blank.

Cheers…

Bookmarkify Frustration

More »

Change Default Administrator Username and Password

Very first step, change default password of your Modem/Router. Manufacturers set both the account username and password at the factory. The username is often simply the word admin or administrator. The password is typically empty (blank), the words “admin,” “public,” or “password,” or some other simple word. You can login to your administration page by using 192.168.1.1 or using instruction guide provided by your ISP or Hardware company.

Turn on (Compatible) WPA / WEP Encryption
All Wi-Fi equipment supports some form of encryption. Encryption technology scrambles messages sent over wireless networks so that they cannot be easily read by humans. Several encryption technologies exist for Wi-Fi today. Naturally you will want to pick the strongest form of encryption that works with your wireless network. However, the way these technologies work, all Wi-Fi devices on your network must share the identical encryption settings. Therefore you may need to find a “lowest common demoninator” setting.

Change the Default SSID
Access points and routers all use a network name called the SSID. Manufacturers normally ship their products with the same SSID set. For example, the SSID for Linksys devices is normally “linksys.” True, knowing the SSID does not by itself allow your neighbors to break into your network, but it is a start. More importantly, when someone finds a default SSID, they see it is a poorly configured network and are much more likely to attack it. Change the default SSID immediately when configuring wireless security on your network.

Enable MAC Address Filtering
Each piece of Wi-Fi gear possesses a unique identifier called the physical address or MAC address. Access points and routers keep track of the MAC addresses of all devices that connect to them. Many such products offer the owner an option to key in the MAC addresses of their home equipment, that restricts the network to only allow connections from those devices. Do this, but also know that the feature is not so powerful as it may seem. Hackers and their software programs can fake MAC addresses easily.

Disable SSID Broadcast
In Wi-Fi networking, the wireless access point or router typically broadcasts the network name (SSID) over the air at regular intervals. This feature was designed for businesses and mobile hotspots where Wi-Fi clients may roam in and out of range. In the home, this roaming feature is unnecessary, and it increases the likelihood someone will try to log in to your home network. Fortunately, most Wi-Fi access points allow the SSID broadcast feature to be disabled by the network administrator.

Do Not Auto-Connect to Open Wi-Fi Networks
Connecting to an open Wi-Fi network such as a free wireless hotspot or your neighbor’s router exposes your computer to security risks. Although not normally enabled, most computers have a setting available allowing these connections to happen automatically without notifying you (the user). This setting should not be enabled except in temporary situations.

Assign Static IP Addresses to Devices
Most home networkers gravitate toward using dynamic IP addresses. DHCP technology is indeed easy to set up. Unfortunately, this convenience also works to the advantage of network attackers, who can easily obtain valid IP addresses from your network’s DHCP pool. Turn off DHCP on the router or access point, set a fixed IP address range instead, then configure each connected device to match. Use a private IP address range (like 10.0.0.x) to prevent computers from being directly reached from the Internet.

Enable Firewalls On Each Computer and the Router
Modern network routers contain built-in firewall capability, but the option also exists to disable them. Ensure that your router’s firewall is turned on. For extra protection, consider installing and running personal firewall software on each computer connected to the router.

Position the Router or Access Point Safely
Wi-Fi signals normally reach to the exterior of a home. A small amount of signal leakage outdoors is not a problem, but the further this signal reaches, the easier it is for others to detect and exploit. Wi-Fi signals often reach through neighboring homes and into streets, for example. When installing a wireless home network, the position of the access point or router determines its reach. Try to position these devices near the center of the home rather than near windows to minimize leakage.

Turn Off the Network During Extended Periods of Non-Use
The ultimate in wireless security measures, shutting down your network will most certainly prevent outside hackers from breaking in! While impractical to turn off and on the devices frequently, at least consider doing so during travel or extended periods offline. Computer disk drives have been known to suffer from power cycle wear-and-tear, but this is a secondary concern for broadband modems and routers.

If you own a wireless router but are only using it wired (Ethernet) connections, you can also sometimes turn off Wi-Fi on a broadband router without powering down the entire network.

Source: compnetworking.about.com

Bookmarkify Frustration

More »

• Go to Start, then click Run, and then type osk.

Enjoy

Bookmarkify Frustration

More »

CAUSE
This issue occurs for one or more of the following reasons:

• You have a corrupted Outlook profile or a corrupted Outlook Express identity.
• There are conflicts with add-ins or with antivirus software.
• The registry contains incorrect information for the Protected Storage System Provider subkey for the user account in Windows XP, in Windows 2000, and in Outlook 2003 or earlier versions of Outlook.

Method: Back up your registry and remove the user account information from the “Protected Storage System Provider” subkey. Then, reenter your password options.
To do this, follow the steps for the version of Windows that you are using.

Note the the steps listed in this section should not be used on a computer running Windows Vista.
Back up the registry key
1.      Click Start, and then click Run.
2.      In the Open box, type regedit, and then click OK.
3.      Locate and then click the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Protected Storage System Provider
4.      On the File menu, click Export.
5.      In the Save in box, select a location where you want to save the .reg file.
6.      Type a file name in the File name box, and then click Save.
7.      On the File menu, click Exit.
Remove the user account information
Important Do not remove the main Protected Storage System Provider key. This key is not automatically regenerated. If you do not have password retention problems and you do not remember your password, deleting the user subkey may cause you not to be able to retrieve your mail.

Note If you use Windows XP, you must have administrator permissions to edit the system registry.
1.      Exit all programs.
2.      Click Start, click Run, type regedit in the Open box , and then click OK
3.      3. Locate and then click the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Protected Storage System Provider
4.      On the Edit menu, click Permissions.
5.      Click the registry key for the user who is currently logged on. Then, make sure that the Read and Full Control permissions are both set to Allow.
6.      Click Advanced. Then, verify that the user who is currently logged on is selected, that Full Control is listed in the Permissions column, and that This Key and Subkeys is listed in the Apply to column.
7.      Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box.
8.      Click Apply, and then click Yes to continue.
9.      Click Ok two times
10.      Double-click the Protected Storage System Provider key to expand the key. Click the user subkey folder that is directly underneath the Protected Storage System Provider key, click Delete on the Edit menu, and then click Yes in the warning message dialog box.

The user subkey folder resembles the following example:

S-1-5-21-124525095-708259637-1543119021-16701

Note For every identity that you have, there may be a subkey under the Protected Storage System Provider key. To resolve this issue in all identities, you must delete all the user subkeys folders that are under the Protected Storage System Provider key.
11.      On the Registry menu, click Exit. Then, restart the computer.

Source: http://support.microsoft.com/default.aspx?scid=kb;en-us;290684

Bookmarkify Frustration

More »

• Click Start
• Click Run
• Type  regedit (Note must backup your registry)
• When the Registry Edit windows open scroll down to the following key
  

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

• In the right pane look for “NoFolderOptions”
• Make sure the “NoFolderOptions” is set to 0
• If there is “NoFolderOption” click Edit on the toolbar
• Click New
• Click DWORD Value
• Name it “NoFolderOption” (without the quotes)
• The value should be set to 0 if not double click on the “NoFolderOption” and a window will open, type in 0

Bookmarkify Frustration

More »